|
| |
TM 9-2320-364-34-3
18-162
18-13. CONTAINER HANDLING UNIT (CHU) KIT INSTALLATION (CONT).
NOTE
Hardware for strut brackets
can be found in box A, pack
no. 1 of CHU kit crate.
Both sides of hard lift
brackets are the same. Right
side shown.
(106)
Remove two locknuts (141) and screws
(142) from hard lift bracket (143) and
crossover tube (144). Discard locknuts and
screws.
(107)
Remove two locknuts (145) and screws
(146) from hard lift bracket (143) and truck
frame (27). Discard locknuts and screws.
(108)
Repeat Steps (106) and (107) for left side
of truck.
Right strut bracket assembly
weighs 80 lbs (36 kg). Attach
suitable lifting device to prevent
possible injury to personnel.
NOTE
Strut bracket assemblies are
installed the same way. Right side
shown.
(109)
From CHU kit crate, unbolt and remove
right strut bracket assembly (147).
(110)
Install screw (148), screw (149), two
locknuts (150) and strut bracket assembly
(147) on hard lift bracket (143) and frame
(27).
(111)
Position two screws (151) and two locknuts
(152) on strut bracket assembly (147), hard
lift deck bracket (138) and frame (27).
(112)
Tighten screw (139) and two screws (151).
NOTE
Inside screw on crossover tube
should be installed and tightened
first to ease installation.
(113)
Install two screws (153), locknuts (154)
and strut bracket assembly (147) on hard
lift bracket (143) and crossover tube (144).
(114)
Repeat Steps (109) through (113) for left
side of truck.
144
148
147
153
154
27
143
149
144
145
146
143
141
142
27
138
151
152
139
143
147
150
151
|
