|
| |
TM 9-2320-364-34-3
18-175
Leave enough slack in wire
harness around pivot assembly to
rotate slider without causing
damage to harness. (In stowed
position.)
(168)
Install transit lock switch wire harness
(199) with three screws (200), washers
(201) and cushion clips (198) on arm
assembly (158).
NOTE
Grease fittings can be found in
box B, pack no. 10 of CHU kit
crate.
(169)
Install grease fittings (202) and (203) in
arm assembly (158).
NOTE
Reflectors are located on
removed roller bracket.
(170)
Remove two self tapping screws (204),
reflector housing (205) and reflector (206)
from roller bracket (207). Discard
self-tapping screws.
(171)
Using two self tapping screws (208) install
reflector (206) and reflector housing (205)
on slider (186).
(172)
Repeat Steps (132) through (171) for left
side of truck.
207
208
206
205
186
204
206
205
202
199
200
201
198
158
203
|
