|
| |
TM 9-2320-364-34-3
18-205
NOTE
Lifting frame is properly stowed
when completely seated on cone
weldment.
(13)
Ensure lifting frame (328) is completely
seated on cone weldment (62).
NOTE
Perform Steps (14) and (15), as
necessary, if lifting frame is not
completely seated.
(14)
Raise lifting frame (328) with LHS (344)
approximately 12 in. (30 cm) then lower
lifting frame on cone weldment (62).
(15)
Repeat Step (13).
(16)
Shut OFF engine.
NOTE
Ensure LF wear pads contact
LHS hook arm.
(17)
With the aid of an assistant, position lifting
frame (328) towards rear of truck until LF
wear pads (345) contact LHS.
344
328
62
345
|
