|
| |
TM 9-2320-364-34-3
18-269
(5)
Remove .25 in. (.6 cm) of insulation (8)
from end of wire 451 (6).
(6)
Position terminal (9) in crimping tool.
(7)
Position wire (6) in terminal (9) and crimp
terminal to wire.
(8)
Install wire 451 (6) in position 1 on S17
connector (10) on kit harness.
(9)
Install removal tool in position D (11) on
MC13 connector (3) until seated.
(10)
Remove wire 505 (12) from position D (11)
of MC13 connector (3) and remove tool.
(11)
Cut off terminal (13) from end of wire 505
(12).
|
