|
| |
TM 9-2320-364-34-3
13-42
13-10. REAR TANDEM CROSSMEMBER/GUSSET REPLACEMENT (CONT).
e.
Lower Right Gusset Replacement.
(1)
Removal.
Do not remove upper and
lower gussets at the same
time. Removal of both
gussets could cause
damage to vehicle parts
due to possible shifting.
NOTE
Tag and mark all screws
prior to removal.
(a)
Remove three locknuts (1) and
screws (2) from spring mounts (3),
spacers (4) and (5) and lower
gusset (6). Discard locknuts.
(b)
With the aid of an assistant, remove
eight locknuts (7) and screws (8) from
spring mounts (3), frame (9) and lower
gusset (6). Discard locknuts.
(c)
With the aid of an assistant, remove
three locknuts (10), screws (11) and
lower gusset (6) from frame (9).
Discard locknuts.
(2)
Installation.
NOTE
Ensure all spacers are on top of spring mounts before installing lower gusset.
All screws must be installed in original locations.
(a)
With the aid of an assistant, position spacers (4) and (5) and lower gusset (6) on frame (9) and
install three screws (11) with five locknuts (10).
(b)
With the aid of an assistant, install eight screws (8) in spring mounts (3), frame (9) and lower
gusset (6) with eight locknuts (7).
(c)
Install three screws (2) in lower gusset (6), spacers (4) and (5) and spring mounts (3) with three
locknuts (1).
|
