|
| |
TM 9-2320-364-34-4
C-23
C-22. LHS BUSHING REMOVER.
Fabricate LHS bushing remover from 3.38 in. (85.85mm) x 4 1/2 in. (114 mm) diameter steel tubing.
a.
Cut 4 1/2 in. (114 mm) outside diameter x 1/2 in. (13 mm) thick tubing to cut length of 3.38 in. (85.85 mm).
b.
Cut a 1/4 in. (6 mm) x 45 degree chamfer where indicated.
c.
Paint as required.
|
