|
| |
TM 9-2320-364-34-4
20-6
20-2. INSTALLING ENGINE ON STAND (CONT).
NOTE
Tag and mark wires prior to
removal.
(17)
Remove nut (33), lockwasher (34) and wire
1816 (35) from starter solenoid (36).
Reinstall nut (33) on starter solenoid (36).
Discard lockwasher.
(18)
Remove nut (37), lockwasher (38) and wire
1818 (39) from starter (40). Reinstall
nut (37) on starter (40). Discard lockwasher.
(19)
Remove two of three screws (41) and
lockwashers (42) from starter mounting
bracket (43). Discard lockwashers.
Starter weighs 73 lbs (33 kg).
Attach suitable lifting device
prior to removal to prevent
possible injury to personnel.
(20)
Install lifting device on starter (40).
(21)
With the aid of an assistant, remove
remaining screw (41) and lockwasher (42)
from starter mounting bracket (43).
Discard lockwasher.
(22)
Remove starter (40) from flywheel
housing (44).
(23)
Remove gasket (45) from starter (40) and
flywheel housing (44). Discard gasket.
(24)
Remove lifting device from starter (40).
|
