|
| |
TM 9-2320-364-34-4
C-27
C-26. CONSTANT VELOCITY U-JOINT BEARING CAP REMOVAL TOOL.
Fabricate from 1 in. (25.4 mm) mild steel round stock; 4 in. (101.6 mm) long.
a.
Turn down 2 1/4 in. (57.15 mm) of 1 in. (25.4 mm) mild steel round stock to .39 in. (10 mm).
b.
Tap 1 in. (25.4 mm) of 10 mm diameter shaft with 10 mm by 1 in. (25.4 mm) threads.
c.
Drill 5/8 in. (16mm) hole 1 in. (25.4mm) deep in 1 in. (25.4 mm) end of mild steel round stock.
d.
Tap 1 in. (25.4 mm) of 3/4 in. by 16 diameter hole in 1 in. (25.4 mm) end of mild steel round stock.
|
