| |
TM 9-2320-364-34-4
C-28
C-27. LHS WASHER.
Fabricate LHS washer from 2 1/4 in. (57.15 mm) by 1/4 in. (6.35 mm) diameter steel stock.
a.
Drill 1 1/4 in. (31.75 mm) hole through steel stock where indicated.
b.
Paint as required.
c.
An alternate flat washer that may be used is part number MS51412-44.
0.25 IN.
(6.35 mm)
|