|
| |
TM 9-2320-364-34-4
C-32
C-33. AXLE PLATE.
Fabricate axle plate from 1/8 in. (3 mm) thick mild steel stock.
a.
Cut a steel plate 4.50 in. (114.30 mm) by 8 in. (203.20 mm).
b.
Drill eight .62 in. (15.75 mm) diameter holes where shown.
c.
Drill four .44 in. (11.18 mm) diameter holes where shown.
d.
File off rough edges.
e.
Paint as required.
|
