|
| |
TM 9-2320-364-34-4
20-141
d.
Assembly.
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(1)
Apply coat of sealing compound to plugs (24), (25), (26), (27), (28), (29), (30) and (31).
(2)
Install plug (24) in rear right cylinder head (1). Tighten plug 168 to 192 lb-in (19 to 22 N.m).
(3)
Install two plugs (25) in rear right cylinder head (1). Tighten 23 to 27 lb-ft (31 to 37 N.m).
(4)
Install two plugs (26) in rear right cylinder head (1). Tighten 216 to 264 lb-in (24 to 30 N.m).
(5)
Install plug (27) in rear right cylinder head (1). Tighten 33 to 37 lb-ft (45 to 50 N.m).
(6)
Install two plugs (28) in rear left cylinder head (23). Tighten 216 to 264 lb-in (24 to 30 N.m).
(7)
Install two plugs (29) in rear left cylinder head (23). Tighten 23 to 27 lb-ft (31 to 37 N.m).
(8)
Install plug (30) in rear left cylinder head (23). Tighten 168 to 192 lb-in (19 to 22 N.m).
(9)
Install plug (31) in rear left cylinder head (23). Tighten 33 to 37 lb-ft (45 to 50 N.m).
|
