|
| |
TM 9-2320-364-34-4
20-142
20-49. CYLINDER HEAD REPAIR (CONT).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(10)
Apply coat of sealing compound to plugs (15), (16), (17), (18), (19), (20), (21) and (22).
(11)
Install plug (15) in front right cylinder head (1) until flush with cylinder head.
(12)
Install plug (18) in front right cylinder head (1). Tighten 168 to 192 lb-in (19 to 22 N.m).
(13)
Install plug (16) in front right cylinder head (1). Tighten 23 to 27 lb-ft (31 to 37 N.m).
(14)
Install plug (17) in front right cylinder head (1). Tighten 33 to 37 lb-ft (45 to 50 N.m).
(15)
Install two plugs (19) and plug (20) in front left cylinder head (23). Tighten 14 to 16 lb-ft (19 to 22 N.m).
(16)
Install plug (21) in front left cylinder head (23). Tighten 23 to 27 lb-ft (31 to 37 N.m).
(17)
Install plug (22) in front left cylinder head (23). Tighten 33 to 37 lb-ft (45 to 50 N.m).
|
