|
| |
TM 9-2320-364-34-4
20-216
20-64. ENGINE CYLINDER BLOCK REPAIR (CONT).
c.
Assembly.
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
NOTE
Perform Steps (1) through (6) only if removed.
(1)
Coat four cup plugs (37) with sealing compound.
(2)
Using cylinder block plug, install four cup plugs (37) in both right and left sides of engine block (5) until
flush.
(3)
Coat cup plug (36) with sealing compound.
(4)
Using cylinder block plug, install cup plug (36) in bottom left rear of engine block (5) to depth of 0.12 in.
(3.05 mm).
(5)
Coat dowel pins (35) with sealing compound.
(6)
Install two dowel pins (35) in rear of engine block (5) until they protrude 3/8 in. (9.5 mm).
|
