|
| |
TM 9-2320-364-34-4
20-226
20-64. ENGINE CYLINDER BLOCK REPAIR (CONT).
(23)
Remove 20 screws (13), spacers (12) and
two plates from engine block (5).
(24)
Remove T-handles (11) from plates.
(25)
Remove two oil seals (8) and 15 water
seals (9) from 34 counterbored holes (10)
in both sides of engine block (5). Discard
two oil seals.
(26)
Remove and discard eight compression
gaskets (6) from cylinders (7).
(27)
Remove two screws (20), nuts (21), four
lockwashers (22), water inlet cover plate,
and gasket (23) from engine block (5).
Discard lockwashers and gasket.
|
