|
| |
TM 9-2320-364-34-4
20-227
(28)
Remove cylinder liner (4), insert (2) and
two seal rings (1) from each cylinder
bore (3). Discard seal rings.
Compressed air used for
cleaning purposes will not
exceed 30 psi (207 kPa). Use
only with effective chip guarding
and personal protective
equipment (goggles/shield,
gloves, etc). Failure to comply
may result in injury or death to
personnel.
(29)
Dry engine block (5) with compressed air.
(30)
Dry cylinder liners (4) and inserts (2) with
compressed air.
(31)
Coat cylinder liners (4) and inserts (2) with
lubricating oil.
e.
Follow-On Maintenance:
Install main bearing and crankshaft, (Para 20-65).
END OF TASK
|
