|
| |
TM 9-2320-364-34-4
20-260
20-76. FLYWHEEL HOUSING AND REAR OIL SEAL INSTALLATION (CONT).
a.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
NOTE
Coat threads of pipe plugs (1),
(2) and (3) with sealing
compound.
(1)
Install pipe plugs (2) and (3) in back side of
flywheel housing (4).
(2)
Install pipe plug (1) in bottom of flywheel
housing (4).
(3)
Lubricate gear train (5) with lubricating oil.
(4)
Apply grease to engine side of flywheel
housing (4).
(5)
Position gasket (6) on engine side of
flywheel housing (4).
(6)
Apply grease to gasket (6).
(7)
Install four guide studs in engine block (7).
|
