|
| |
TM 9-2320-364-34-4
20-273
Materials/Parts
Compound, International, No. 2
(Item 16, Appendix B)
Lockscrew (12) (Item 224, Appendix E)
This task covers:
a. Installation
b. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Oil pan installed, (Para 20-80)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Wrench, Torque (0 to 175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
20-81. FLEX PLATE INSTALLATION.
a.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(1)
Apply International Compound No. 2 to
threads of 12 screws (6).
(2)
Align screw holes in hub (8) and plate (7)
with crankshaft (9) inside flywheel housing
(3) and install with 12 lockscrews (6).
Tighten lockscrews to 50 lb-ft (68 N.m).
(3)
Mark position of lockscrews (6).
(4)
Tighten lockscrews (6) an additional 90
degrees to 100 degrees in sequence shown.
|
