|
| |
TM 9-2320-364-34-4
20-274
20-81. FLEX PLATE INSTALLATION (CONT).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(5)
Apply International Compound No. 2 to
threads of 12 lockscrews (1).
NOTE
Six welded plates on inner
most disk face toward
engine.
Remove cable ties after flex
coupling inserts are
installed.
(6)
Align screw holes in disk (5), four disks (4)
and plate (2) with hub (8).
(7)
Install five disks (4) and (5) and plate (2)
with 12 lockscrews (1). Tighten lockscrews
100 lb-ft (136 N.m) in sequence shown.
b.
Follow-On Maintenance:
Install vibration damper and front balance cover, (Para 20-82).
END OF TASK
|
