|
| |
TM 9-2320-364-34-4
20-282
20-84. ENGINE OIL FILTER AND SPIN-ON ADAPTER HOUSING INSTALLATION (CONT).
Use care when installing spring.
Spring is under tension and can
act as a projectile if released and
could cause severe eye injury.
(4)
Install valve disk (23), spring (22), washer
(21) and plug (20) in remote engine oil filter
manifold (16).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(5)
Apply sealing compound to threads of two
screws (14), screws (13) and screws (12).
(6)
Install gasket (17) and engine oil filter
manifold (16) on oil cooler adapter cover
(18) with two screws (14), screws (13),
screws (12) and four lockwashers (15).
Tighten screw 30 to 35 lb-ft (41 to 47 N.m).
(7)
Apply sealing compound to threads of
adapter (19).
NOTE
Adapter in Step (8) is installed in
bottom port marked “IN” and
facing down.
(8)
Install adapter (19) in remote engine oil
filter manifold (16).
20
21
22
23
12
13
14
15
16
17
18
19
16
15
|
