|
| |
TM 9-2320-364-34-4
20-303
(3)
Install fuel injector wire harness (9) and
flange with gasket (8) on cylinder
head (10) with two washers (7) and
screws (6).
(4)
Connect wire terminals to fuel inlet block on
fuel injector (5) and tighten retaining
screws (4).
(5)
Remove caps from four fuel line
connectors (3).
(6)
Apply lubricating oil to four preformed
packings (2).
(7)
Using fuel line nut wrench, install four
preformed packings (2) and two fuel
lines (1) on connectors (3). Tighten to 160
lb-in (18 N.m).
(8)
Repeat Steps (1) through (7) for other seven
fuel injectors.
b.
Follow-On Maintenance:
Install engine brake retarders, (Para 20-93).
END OF TASK
|
