| |
TM 9-2320-364-34-4
20-321
Materials/Parts
Grease (Item 21, Appendix B)
Sealing Compound (Item 53, Appendix B)
Sealing Compound (Item 56, Appendix B)
This task covers:
a. Assembly
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Secondary fuel filter, base and fuel hoses
installed, (Para 20-99)
Tools and Special Tools
Tool Kit, General Mechanics
(Item 240, Appendix F)
Handle, Installer (Item 93, Appendix F)
Installer, Seal (Item 116, Appendix F)
Wrench, Torque (0 to 175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
20-100. RIGHT THERMOSTAT HOUSING INSTALLATION.
Materials/Parts - Continued
Gasket (Item 72, Appendix E)
Gasket (Item 91, Appendix E)
Lockwasher (Item 285, Appendix E)
Lockwasher (5) (Item 292, Appendix E)
Seal (Item 566, Appendix E)
a.
Assembly.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(1)
Coat threads of plug (1) with sealing
compound.
(2)
Install plug (1) in right thermostat
housing (2).
(3)
Position seal ring (3) on installer and handle
and install seal ring (3) in right thermostat
housing (2).
(4)
Install thermostat (4) in right thermostat
housing (2).
|