|
| |
TM 9-2320-364-34-4
20-328
20-103. TURBOCHARGER AND AIR INLET HOUSING INSTALLATION (CONT).
(8)
Position hose (25) and two clamps (24) on
air inlet housing adapter (29).
(9)
Apply lubricating oil to gasket (28).
(10)
Install gasket (28) on air inlet housing (9).
(11)
Install turbocharger assembly (4) on air inlet
housing (9) with two lockwashers (27) and
screws (26). Tighten screws to 45 to 50 lb-ft
(61 to 68 N.m).
(12)
Align hose (25) and tighten two clamps (24).
(13)
Fill turbocharger assembly (4) with clean
engine oil and spin rotor by hand.
(14)
Position turbocharger tube assembly (20)
on engine (23).
(15)
Install hose assembly (21) on fitting (22).
(16)
Install tube assembly (20) in turbocharger
assembly (4).
|
