|
| |
TM 9-2320-364-34-4
20-338
20-104. ELECTRONIC CONTROL MODULE (ECM) INSTALLATION (CONT).
(24)
Connect wire 1716 (88) to terminal on left cylinder head (89).
(25)
Connect wire 1715 (86) to terminal on right cylinder head (87).
(26)
Install ether start aid thermostat (85) on engine block (36) with washer (84), lockwasher (83) and
screw (82).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(27)
Apply corrosion preventive compound to screw (82).
(28)
Connect MC56 connector (81).
|
