|
| |
TM 9-2320-364-34-4
20-344
20-104. ELECTRONIC CONTROL MODULE (ECM) INSTALLATION (CONT).
Perform Steps (60) and (61) for DDEC III engines.
(57)
Position DDEC engine wire harness (41) on engine (36) and connect MC17 connector (40) to ECM (39).
(58)
Install cover plate (38) on ECM (39) with two lockscrews (37). Tighten screws to 156 to 204 lb-in
(18 to 23 N.m).
(59)
Position STE/ICE-R wire harness (35)
on engine (36) with two nuts (34).
(60)
Connect two injector wiring harness
connectors (45) to right side of ECM (44).
(61)
Connect engine wiring harness connector
(43) to right side of ECM (44) and tighten
screw (42).
|
