|
| |
TM 9-2320-364-34-4
23-22
23-8. TRANSMISSION SOLENOID WIRING HARNESS REPAIR (CONT).
a.
Removal.
(1)
Disconnect wiring harness (1) from
bulkhead connector (2).
(2)
Remove nine screws (3) and solenoid
harness assembly (4) from separator
plate (5).
(3)
Remove solenoid gasket (6) from separator
plate (5). Discard solenoid gasket.
NOTE
Perform Steps (4) and (5) if
bulkhead connector is damaged.
(4)
Loosen connector nut (7) until slots in nut
match extended pins on connector (2).
(5)
Remove nut (7), lockwasher (8),
connector (2) and preformed packing (9)
from transmission housing (10). Discard
lockwasher and preformed packing.
|
