|
| |
TM 9-2320-364-34-4
23-30
23-9. CONTROL VALVE ASSEMBLY REPAIR (CONT).
Components in each valve bore
are spring-loaded and must be
compressed while removing
retaining pin. Ensure proper eye
protection is worn to avoid
injury to personnel.
(21)
Compress stop (48), remove and discard
flared spring pin (49) from 4-5 shift
valve (50).
(22)
Remove stop (48), spring (51) and 4-5 shift
valve (50) from control valve body (2).
Discard spring.
(23)
Compress stop (52), remove and discard
retaining pin (53) from trim boost regulator
valve (54).
(24)
Remove stop (52), spring (55) and trim
boost regulator valve (54) from control valve
body (2). Discard spring.
Washer is under spring tension.
Wear proper eye protection to
avoid injury to personnel.
(25)
Compress washer (56) and remove retaining
pin (57) from lubrication valve (58).
(26)
Remove washer (56), spring (59),
lubrication valve (58) and valve guide pin
(60) from front plate (61). Discard spring.
|
