|
| |
TM 9-2320-364-34-4
23-29
Components in each valve bore are spring-loaded and must be compressed while removing
retaining pin. Ensure proper eye protection is worn to avoid injury to personnel.
NOTE
Note location, type, and size of retaining pins. Retaining pins must be installed in original
locations.
(11)
Turn valve body over and compress stop (28)
and remove spring pin (29) from 2-3 shift
valve (30) from control valve body (2).
Discard spring pin.
(12)
Remove stop (28), spring (31) and 2-3 shift
valve (30) from control valve body (2).
Discard spring.
(13)
Compress stop (32) and discard retaining
pin (33) from 3-4 shift valve (34).
(14)
Remove stop (32), spring (35) and 3-4 shift
valve (34) from control valve body (2).
Discard spring.
(15)
Turn control valve body (2) over and
compress stop (36), remove and discard
retaining pin (37) from neutral range
valve (38).
(16)
Remove stop (36), spring (39) and neutral
range valve (38) from control valve body (2).
Discard spring.
(17)
Compress stop (40), remove and discard
retaining pin (41) from forward and reverse
valve (42).
(18)
Remove stop (40), spring (43) and forward
and reverse valve (42) from control valve
body (2). Discard spring.
(19)
Compress stop (44), remove and discard
retaining pin (45) from solenoid priority
valve (46).
(20)
Remove stop (44), spring (47) and solenoid
priority valve (46) from control valve
body (2). Discard spring.
|
