| |
TM 9-2320-364-34-4
23-43
Failure to use sleeve when
tightening puller may damage
parts.
NOTE
Puller is installed in holes of
screws removed in Step (5).
(6)
Install forcing screw and puller bolts in
puller and sleeve.
(7)
Install puller on ground sleeve (3).
(8)
Tighten forcing screw to separate torque
converter pump (8) from ground sleeve (3).
(9)
Remove puller and sleeve from ground
sleeve (3).
(10)
Remove torque converter pump (8) from
torque converter housing (1) and place on
clean, level surface.
|