| |
TM 9-2320-364-34-4
23-50
23-12. TORQUE CONVERTER HOUSING REPAIR (CONT).
a.
Removal.
(1)
Remove seven screws (1) and lockwashers (2) from inside torque converter housing (3). Discard
lockwashers.
(2)
Remove seven screws (4) and lockwashers (5) from transmission housing (6). Discard lockwashers.
Torque converter housing weighs 100 lbs (45 kg). Attach suitable lifting device for
removal or installation to prevent possible injury to personnel.
(3)
Install lifting device on torque converter housing (3) with two screws.
(4)
With the aid of an assistant, remove torque converter housing (3) from transmission housing (6) and place
on level work surface.
(5)
Remove two screws and lifting device from torque converter housing (3).
NOTE
Bearing races and bearing may remain on either torque converter housing or transmission
housing.
(6)
Remove bearing race (7), roller bearing (8) and bearing race (9) from transmission housing (6) or torque
converter housing (3).
|