|
| |
TM 9-2320-364-34-4
23-51
b.
Disassembly.
NOTE
Mark position of fitting and
elbows prior to removal.
(1)
With the aid of an assistant, position torque
converter housing (1) on wooden blocks
with engine mounting surface facing down.
(2)
Remove two elbows (2) and preformed
packings (3) from torque converter
housing (1). Discard preformed packings.
(3)
Remove fitting (4) and preformed
packing (5) from torque converter
housing (1). Discard preformed packing.
NOTE
Perform Step (4) only if plugs are
damaged.
(4)
Remove four plugs (6) from torque
converter housing (1).
(5)
Remove temperature sending unit (7) from
torque converter housing (1).
(6)
Remove and discard two seal rings (8) from
front support hub (9).
When screws are removed, oil
pump will fall. Make sure that
assistant firmly supports oil pump
inside torque converter housing
to prevent personal injury or
damage to parts.
(7)
With the aid of an assistant, support oil
pump (10) and remove six screws (11) and
oil pump (10) from torque converter
housing (1).
|
