|
| |
TM 9-2320-364-34-4
23-64
23-12. TORQUE CONVERTER HOUSING REPAIR (CONT).
(5)
Install bearing race (6) in transmission
housing (7).
(6)
Coat bearing race (8) and roller bearing (9)
with grease and install in torque converter
housing (10).
(7)
With the aid of an assistant, turn torque
converter housing (10) over so support hub
faces down.
Torque converter housing weighs
100 lbs (45 kg). Attach suitable
lifting device for removal or
installation to prevent possible
injury to personnel.
(8)
Install lifting device on torque converter
housing (10).
(9)
With the aid of an assistant, position torque
converter housing (10) over transmission
housing (7) while making sure bearing
race (8) does not fall out.
Take care not to damage bearing
and seal rings when installing
converter housing.
(10)
Install two guide pins, one in transmission
housing (7) and one directly opposite in
torque converter housing (10). Install
torque converter housing (10) on
transmission housing (7). Remove lifting
device and guide pins.
(11)
Position seven lockwashers (11) and
screws (12) in transmission housing (7).
(12)
Install seven lockwashers (13) and screws (14)
torque converter housing (10). Tighten screws
67 to 80 lb-ft (91 to 108 N.m).
(13)
Tighten screws (12) in transmission
housing (7) to 67 to 80 lb-ft (91 to 108 N.m).
f.
Follow-On Maintenance:
Install torque converter pump on transmission, (Para 23-11).
END OF TASK
|
