|
| |
TM 9-2320-364-34-4
23-75
(20)
Install outer race (15) on small hub of
forward clutch assembly (7).
(21)
Install thrust bearing (14) on outer race (15).
(22)
Coat inner race (13) with hydraulic oil.
(23)
Install inner race (13) on thrust bearing (14).
(24)
Install forward clutch driving hub (12) on
forward clutch assembly (7).
(25)
Soak internal-splined plates (11) in clean
lubricating oil for minimum of two
minutes.
NOTE
Assemble clutch plates so that
cone of each plate faces same
direction as cone of adjacent
plate.
(26)
Alternately install five external-tanged
plates (10) and five internal-splined
plates (11) in forward clutch assembly (7)
(27)
Install fifth clutch driving hub (9) on
forward clutch assembly (7).
Use care when installing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released causing
injury to personnel.
(28)
Install retaining ring (8) on fifth clutch
driving hub (9).
|
