| |
TM 9-2320-364-34-4
23-109
(8)
Stack third clutch plates and third clutch piston as shown in press.
(a)
Evenly apply specified load. Measure dimension A.
(b)
From Table 23-4, select proper external-tanged clutch plate combination.
(c)
Tie parts together and tag.
(d)
Install third clutch piston in center support (Para 23-17 d. Assembly.).
Table 23-4. External-Tanged Clutch Plate Combination
Dimension A
Thin External
Thick External
From
To
Tanged Plates
0.0993 to 0.1063
Tanged Plates
0.1161 to 0.1231
3.2280 in.
(81.9912 mm)
3.2147 in.
(81.6534 mm)
Add 2
Remove 2
3.2147 in.
(81.6534 mm)
3.2014 in.
(81.3156 mm)
Add 1
Remove 1
3.2014 in.
(81.3156 mm)
3.1794 in.
(80.7568 mm)
3.1794 in.
(80.7568 mm)
3.1661 in.
(80.4189 mm)
Remove 1
Add 1
3.1661 in.
(80.4189 mm)
3.1528 in.
(80.0735 mm)
Remove 2
Add 2
|