|
| |
TM 9-2320-364-34-4
23-113
e.
Installation.
(1)
Install lifting bracket and lifting device on
rear planetary carrier assembly (12).
Rear planetary carrier assembly
weighs 86 lbs (39 kg). Attach
suitable lifting device for
removal or installation to
prevent possible injury to
personnel.
NOTE
If ring gears do not align with
pinions on rear planetary carrier
assembly while installing, rotate
rear planetary carrier assembly
or yoke as required.
(2)
Align first and second clutch ring gears
inside of transmission housing (3).
Keep fingers away from inside of
transmission housing while
installing rear carrier assembly
or injury to personnel may result.
(3)
Lubricate bearing on bottom of rear
planetary carrier assembly (12) with
hydraulic oil.
(4)
With the aid of an assistant, guide rear
planetary carrier assembly (12) in
transmission housing (3) until rear carrier
assembly is fully seated and turns freely
within transmission housing.
(5)
Remove lifting device and lifting bracket
from rear planetary carrier assembly (12).
|
