|
| |
TM 9-2320-364-34-4
23-114
23-17. PLANETARY GEARING, SHAFTS, AND THIRD CLUTCH REPAIR (CONT).
(6)
Lubricate inner race (11), needle
bearing (10) and outer race (9) with
hydraulic oil.
(7)
Install inner race (11), needle bearing (10)
and outer race (9) on top of rear planetary
carrier assembly inside transmission
housing (3).
(8)
Install center planetary ring gear (8) in
transmission housing (3).
NOTE
Ring gear portion of planetary
connecting drum should be
facing upward.
(9)
Install planetary connecting drum (4) in
transmission housing (3).
(10)
Install thrust washer (13) on main shaft (1).
(11)
Install main shaft (1) in transmission
housing (3).
(12)
Install center sun gear shaft (14) on main
shaft (1).
NOTE
Petrolatum may be applied to
thrust washer to keep thrust
washer positioned in front
planetary carrier assembly.
(13)
Install thrust washer (15) in bottom of front
planetary carrier assembly (2).
(14)
Install front planetary carrier assembly (2)
on main shaft (1).
|
