|
| |
TM 9-2320-364-34-4
23-118
23-18. REAR TRANSMISSION COVER ASSEMBLY REPAIR (CONT).
b.
Disassembly.
(1)
With the aid of an assistant and flange
holder, remove nut (1) and yoke (2) from
output shaft (3). Discard nut.
(2)
Remove screw (4), speed sensor retainer
(5), magnetic speed sensor (6) and
preformed packing (7) from rear cover (8).
Discard screw and preformed packing.
(3)
Remove and discard dust shield (9) from
rear cover (8).
(4)
Remove and discard oil seal (10) from rear
cover (8).
Use care when removing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released causing
injury to personnel.
(5)
Remove retaining ring (11) from rear
cover (8).
NOTE
Perform Step (6) only if plug is
damaged.
(6)
Remove plug (12) from rear cover (8).
|
