|
| |
TM 9-2320-364-34-4
23-120
23-18. REAR TRANSMISSION COVER ASSEMBLY REPAIR (CONT).
(13)
Install spring compressor on piston spring
retainer (18).
Use care when removing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released
causing injury to personnel.
(14)
Compress piston spring retainer (18) and
remove retaining ring (19) from rear
cover (8).
(15)
Remove rear cover (8) from press and
position flange side up on wooden blocks.
(16)
Remove spring compressor and piston
spring retainer (18) from rear cover (8).
(17)
Remove and discard 30 piston release
springs (20) from first clutch piston (21).
(18)
Remove first clutch piston (21) from rear
cover (8).
(19)
Remove and discard inner seal ring (22)
and outer seal ring (23) from first clutch
piston (21).
NOTE
Perform Step (20) only if vent
tube is damaged.
(20)
Remove and discard vent tube (24) from
rear cover (8).
|
