|
| |
TM 9-2320-364-34-4
23-127
e.
Installation.
(1)
Install rear cover gasket (8) on adapter
housing (1).
Rear cover weighs 98 lbs (44 kg).
Attach suitable lifting device for
installation to prevent possible
injury to personnel.
NOTE
There are two dowel pins on
screw flange face of rear cover to
help align cover with
transmission.
(2)
Attach lifting device to yoke (7).
(3)
With the aid of an assistant, install rear
cover (6) on rear adapter housing (1).
(4)
Remove lifting device from yoke (7).
(5)
Position bracket (4), bracket (5), 24
lockwashers (3) and screws (2) in rear
cover (6).
(6)
Tighten screws (2) in rear cover (6) 67 to 80
lb-ft (91 to 108 N.m).
(7)
Position transmission (9) so control valve
side faces upward.
(8)
With the aid of an assistant, hold yoke (7)
with flange holder, tighten nut (10) to 700 lb-
ft (949 N.m).
f.
Follow-On Maintenance:
Install planetary gearing, shafts and third clutch, (Para 23-17).
END OF TASK
|
