|
| |
TM 9-2320-364-34-4
24-24
24-8. TRANSFER CASE ASSEMBLY REPAIR (CONT).
(46)
Rotate front housing (33) until differential
housing (59) is on top.
(47)
Matchmark front shaft assembly (60) and
cover enclosure (61).
(48)
Remove six screws (62) and
lockwashers (63) and front shaft
assembly (60) from differential housing
(59). Discard lockwashers.
NOTE
Note and record thickness of
shims.
(49)
Remove shims (64) from cover
enclosure (61).
(50)
Remove strainer assembly (65) and pipe
plug (66) from cover enclosure (61).
(51)
Remove ten screws (67) and
lockwashers (68) from cover
enclosure (61). Discard lockwashers.
(52)
Position two screws (67) into half
jackscrew holes in cover enclosure (61).
(53)
Tighten screws to break seal between cover
enclosure (61) and differential
housing (59).
(54)
Remove two screws (67) from cover
enclosure (61).
(55)
Remove cover enclosure (61) from
differential housing (59).
(56)
Remove bearing cup (69) from cover
enclosure (61).
NOTE
Perform Step (57) only if dowel
pin is damaged.
(57)
Remove dowel pin (70) from differential
housing (59).
|
