| |
TM 9-2320-364-34-4
24-28
24-8. TRANSFER CASE ASSEMBLY REPAIR (CONT).
(74)
Remove bearing cup (85) from front
housing (33).
(75)
Remove bearing cup (86) from front
housing (33).
(76)
Remove and discard oil seal (87) from
front housing (33).
(77)
Remove fitting (88) from front
housing (33).
(78)
Remove breather (89) and fitting (90) from
front housing (33).
NOTE
Perform Steps (80) through (82)
only if dowels, studs and/or pipe
plug are damaged.
(79)
Remove two dowel pins (91) from front
housing (33).
(80)
Remove eight studs (92) from front
housing (33).
(81)
Remove pipe plug (93) from front
housing (33).
Front housing weighs 200 lbs
(91 kg). Attach suitable lifting
device before removal to prevent
possible injury to personnel.
NOTE
Perform Steps (83) through (86)
if front housing is damaged.
(82)
Install lifting device on front housing (33).
(83)
Remove four screws (94) from holding
fixture and remove front housing (33) from
holding fixture.
(84)
Remove lifting device from front
housing (33).
(85)
Remove four socket head screws (95) and
transfer case adapter kit from front
housing (33).
TRANSFER
CASE
ADAPTER
KIT
LIFTING
DEVICE
33
HOLDING
FIXTURE
94
95
91
33
91
93
92
88
87
90
89
86
85
33
|