|
| |
TM 9-2320-364-34-4
24-35
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(38)
Apply sealing compound to surface of cover
enclosure (61) inside circle made by bolt
holes.
NOTE
Ensure shims of same thickness,
as recorded during removal, are
used for installation.
(39)
Coat shims (64) with sealing compound.
Position shims on cover enclosure (61).
(40)
Align front shaft assembly (60) on cover
enclosure (61). Seat assembly firmly on
cover enclosure.
(41)
Coat threads of six screws (62) with sealing
compound.
(42)
Install six lockwashers (63) and screws (62)
on front shaft assembly (60). Tighten screws
to 60 lb-ft (81 N.m).
(43)
Rotate maintenance stand so open side of
front housing (33) is facing up.
33
|
