|
| |
TM 9-2320-364-34-4
24-36
24-8. TRANSFER CASE ASSEMBLY REPAIR (CONT).
NOTE
Outer ring of cylindrical
bearing fits loosely.
Perform Step (44) if outer
ring was removed.
(44)
Install bearing cup (58) in differential
housing (59) .
Differential shaft assembly
weighs 100 lbs (45 kg). Use an
assistant during installation to
prevent possible injury to
personnel.
(45)
With the aid of an assistant, install
differential shaft assembly (57) in front
housing (33).
(46)
Install bearing cup (56) in bearing
support (55).
(47)
Position bearing support (55) on differential
shaft assembly (57).
(48)
Position bearing support (55) in front
housing (33).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(49)
Coat threads of six screws (53) with sealing
compound.
(50)
Install six washers (54) and screws (53) in
bearing support (55). Tighten screws to 88
lb-ft (119 N.m).
|
