|
| |
TM 9-2320-364-34-4
24-39
Upper shaft assembly weighs 115 lbs (52 kg). Attach suitable lifting device before
installation to prevent possible injury to personnel.
To prevent injury to personnel or equipment damage, make sure chains will not slip off
shaft assembly during lifting operation.
Lower straight down to prevent damage to upper shift fork assembly.
(67)
Using lifting device, install upper shift fork
assembly (50) and upper shaft assembly (48)
in front housing (33).
(68)
Carefully seat upper shaft assembly (48) in
front housing (33).
(69)
Remove lifting eye and lifting device from
upper shaft assembly (48).
(70)
Install piston ring (49) in plate (47).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(71)
Apply sealing compound to threads of two
screws (46).
(72)
Install plate (47) and two screws (46) in
upper shaft assembly (48). Tighten to 88
lb-ft (119 N.m).
|
