|
| |
TM 9-2320-364-34-4
24-44
24-8. TRANSFER CASE ASSEMBLY REPAIR (CONT).
(100)
Install pilot ring (38) in base of air
chamber (10).
(101)
Apply sealing compound to rear housing (4)
around opening for air chamber (10).
(102)
Coat threads of two screws (13) with sealing
compound.
(103)
Install two lockwashers (14) and screws
through base of air chamber (10) in rear
housing (4). Tighten screws to 25 lb-ft
(34 N.m).
(104)
Position washer (12) on top of
stud (17).
(105)
Install locknut (11) on stud (17). Tighten to
180 lb-in (20 N.m).
(106)
Apply lubricating oil to preformed
packing (9).
(107)
Install preformed packing (9) and cap
nut (8) on air chamber (10).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(108)
Apply sealing compound to base of upper
shift rod cover (3) and to threads of two
screws (1).
(109)
Install upper shift rod cover (3) on rear
housing (4) with two lockwashers (2) and
screws (1). Tighten screws to 168 lb-in
(19 N.m).
1
2
4
3
|
