| |
TM 9-2320-364-34-4
24-45
(110)
Install bearing cups (36) and (37) in rear
housing (4).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
NOTE
Ensure shims of same thickness,
as recorded in removal, are
installed.
(111)
Coat shims (28) with sealing compound and
position on rear housing (4).
(112)
Align steering pump adapter plate (26) on
rear housing (4).
(113)
Coat threads of six screws (27) with sealing
compound.
(114)
Install six screws (27) in rear housing (4).
Tighten screws to 60 lb-ft (81 N.m).
NOTE
Ensure shims of same thickness,
as recorded in removal, are
installed.
(115)
Coat shims (25) with sealing compound and position on rear housing (4).
(116)
Align lube pump bearing cap (22) on rear housing (4).
(117)
Coat threads of six screws (23) with sealing compound.
(118)
Install six lockwashers (24) and screws (23) in rear housing (4). Tighten screws to 60 lb-ft (81 N.m).
NOTE
Perform Steps (119) and (120) only if plug was removed.
(119)
Coat threads of plug (21) with sealing compound.
(120)
Install plug (21) in lube pump bearing cap (22).
|