|
| |
TM 9-2320-364-34-4
24-47
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(129)
Coat shims (28) with sealing compound.
Position shims on rear housing (4).
(130)
Install and align matchmarks on steering
pump adapter plate (26) on rear housing (4).
(131)
Coat threads of six screws (27) with sealing
compound.
(132)
Install six screws (27) in rear housing (4).
Tighten screws to 60 lb-ft (81 N.m).
(133)
Perform Steps (121) through (124) to check
and adjust end-play of center shaft
assembly (45).
(134)
Remove lifting eye from center shaft
assembly (45).
(135)
Rotate maintenance stand so upper shaft
assembly (48) is up.
(136)
Install lifting eye in end of upper shaft
assembly (48) on front housing (33). Check
end-play as described in Steps (121) through
(124).
(137)
Perform Steps (125) through (132) to adjust
end-play of upper shaft assembly (48) at lube
pump bearing cap (22) on rear housing (4).
(138)
Remove lifting eye from upper shaft
assembly (48).
LIFTING
EYE
PRY BAR
DIAL
INDICATOR
48
33
22
|
