| |
TM 9-2320-364-34-4
25-41
Adhesives, solvents and sealing
compounds can burn easily, can
give off harmful vapors and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(15)
Coat mating surface of differential (8) with
adhesive.
(16)
Position locking cylinder (7) on
differential (8).
(17)
Install plastic washer (6), washer (5) and
screw (4) on locking cylinder (7).
NOTE
Install screw so that only three
or four threads of screw are
engaged. Screw is being
installed at this time only to
keep screw hole aligned.
(18)
Install screw (1) and washer (2) on locking
cylinder (7).
(19)
Tighten screw (4) to 25 to 32 lb-ft (34 to
43 N.m).
|