|
| |
TM 9-2320-364-34-4
25-63
a.
Removal.
NOTE
Axle No. 5 is shown. Axle No. 1
is similar. Axle No. 1 differential
housing is a mirror image of
Axle No. 5, but internal
components are the same.
(1)
Remove 14 locknuts (1), washers (2) and
three taper rings (3) from studs (4). Discard
locknuts.
Differential assembly weighs 198
lbs (90 kg). Attach a suitable
lifting device prior to removal to
prevent possible injury to
personnel.
(2)
Attach lifting device on differential
assembly (5).
(3)
With the aid of an assistant, remove
differential assembly (5) from axle
housing (6).
NOTE
Perform Step (4) only if studs
are damaged.
(4)
Remove studs (4) from axle housing (6).
(5)
With the aid of an assistant, install
differential adapter on engine stand with six
screws (7).
(6)
With the aid of an assistant, install
differential assembly (5) on differential
adapter with six screws (8) and nuts (9).
(7)
Remove lifting device from differential
assembly (5).
DIFFERENTIAL
ADAPTER
8
7
9
5
LIFTING
DEVICE
|
