| |
TM 9-2320-364-34-4
25-71
NOTE
If preload is incorrect, refer to
Step (7).
(25)
Check preload on pinion shaft (4) using a
torque wrench. Preload must be 48 lb-in.
(5 N.m).
(26)
Stake adjusting nut (5) in two slots of
pinion shaft (4) directly 180 degrees apart.
(27)
Assemble adjusting shim (25) thickness by
applying the opposite change of thickness
applied to adjusting shim (33) in Step (6).
(28)
Install bearing (26) on differential gear (2).
(29)
Install bearing (27) on differential gear (2).
(30)
Install adjusting shim (25) and bearing
races (23) and (24) on differential gear (2).
The differential and bevel gear
weighs 70 lbs (32 kg). Attach a
suitable lifting device prior to
installation to prevent possible
injury to personnel.
(31)
With the aid of an assistant, install
differential gear (2) in differential
housing (16).
|