|
| |
TM 9-2320-364-34-4
25-83
(10)
Remove one screw (9) and five screws (10)
from cover (11).
NOTE
Matchmark housing cover and
housing before removal.
(11)
Remove cover (11) and adjusting shim (12)
from front housing (13). Measure and
record thickness of adjusting shim. Discard
adjusting shim.
(12)
Remove 13 screws (14) from front
housing (13).
(13)
Remove front housing (13) from housing
assembly (15).
NOTE
Bearing race is part of a matched
set with a taper bearing.
(14)
Remove bearing race (16) from front
housing (15).
Split torque weighs 62 lbs
(28 kg). The aid of an assistant
is required to prevent possible
injury to personnel.
NOTE
Install flange assembly on shaft
of split torque to remove split
torque from housing assembly.
(15)
With the aid of an assistant, remove split
torque (17) from housing assembly (15).
NOTE
The bearing race is part of a
matched set with a taper bearing.
(16)
Remove bearing race (18) from housing
assembly (15).
|
